Product Overview
- Economical Clamp for small pin-hole leaks
- Band is 304 Stainless Steel
- Gasket material is Buna-N Rubber
- Nodular Iron Lugs and alloy bolts with Heavy Hex nuts
- Pressure Rating: 300 psi
- Temperature Rating: 250°F
Economical Model BC-EC Band Clamp design allows for quick one-man installation. Bolts fit into iron lugs without removing nuts.
Installation Procedure:
- Thoroughly clean the damaged area with a wire brush. This will assure a bubble tight gasket seal.
- Back off the nuts to the end of the bolt, but do not remove them. Separate the clamp.
- Center the clamp gasket over the area that needs repair. Make sure the gasket extends past damaged area.
- Relocate the bolt heads securely into their receiving lugs. Tighten 3/8" bolts to 25 ft/lbs, 7/16" bolts 35ft/lbs on 2" & larger sizes.
- Pressure test for leaks before leaving area.
| 3" WIDE - 2 BOLT | ||
| Size | Part # | O.D. Range |
| 1/2" | 89999 | 0.84 |
| 3/4" | 89998 | 1.05 |
| 1" | 89997 | 1.32 |
| 1 1/4" | 89996 | 1.66 |
| 1 1/2" | 89995 | 1.9 |
| 2" | 89994 | 2.38 |
| 2.5" | 89992 | 2.88 |
| 3" | 89991 | 3.5 |
| 3.5" | 89990 | 4 |
| 4" | 89989 | 4.5 |
| 5" | ||
| 6" | 89985 | 6.63 |
| 8" | 89984 | 8.63 |
