PS Narrow Style

Pressed Steel Clamp

The Pressed Steel Economy Clamp is used for repairing badly pitted and corroded pipe lines at minimum cost.

This is not a thin spring-steel band with attached lugs. It is a 3/16" thick steel plate with inseparable "wedge-shaped" lugs pressed out of the material itself. This special construction prevents any give or collapse of the lug so that the full amount of take-up pressure applied by the bolts is transmitted directly to the gasket over the leak. While the clamp is heavy enough to outlast the pipe, it is still sufficiently flexible to conform to the pipe surface.

The Pressed Steel Economy Clamp is available in two widths:

Narrow: 4" wide for pit holes, complete with cone plug gasket fastened in place.

Large 5/8" diameter steel bolts, plated and iridite-dipped are furnished with all clamps.

Note: Narrow type in sizes 3" OD through 12" comes with CP2NE (080865) cone plug. Narrow type in sizes 14" OD through 24" comes with CP2NF (080866) cone plug. Narrow type in sizes 30" & 36" comes with CP3NF (082030) cone plug.

Cone plugs are Buna-N but are also available as spares in either Buna-N (black) or Natural Rubber (Red). Temperature Rating 250F degrees.

Pressed Steel Clamp Components

Body: C-1008 HR Pickled

Gasket: Buna-N Material NBR ASTM D 2000 (Durometer 50 +/- 5) (Temperature Range -40F to 250F Degrees)

E Coating: JDM F11T3 18 Mill Thickness